All the configuration related to linking of Accommodations/Units to a specific Reseller is conducted in ‘reseller Connection’ under the Configuration module.
Link new reseller
Step-by-step:
Open the Integration Manager module
Select ‘Reseller Connection’ under Configuration, here you would wo
uld see all the existing resellers that you have opted for, if you wish to connect with a reseller that is not in the list, then click on ‘Activate new connection’
A new window will popup, select the Reseller you wish to opt for and click on ‘Save’ button
By doing this the reseller will be created in the system, however other configuration related to reseller linking needs to be carried out and so you can get in touch with Maxxton’s support connection team for the same
Link new Accommodation Type(s)
Step-by-step:
Open the Integration Manager module
Select ‘Reseller Connection’ under Configuration, here you would see all the existing resellers that you have opted for. Select the reseller you wish to make linking’s for. (Example- Select Booking.com)
Now in Booking.com go to the “Linked accommodation types” card and click on ‘Activate new accommodation types’
A new window will popup, select desired ‘Location’ from dropdown and then you will see all the available accommodation-types under that location that are available for linking.
Please note that Only those Accommodation-types will appear in the result for whom the Booking.com DC has been added in the valid representation. (Refer below picture & also read ‘Did you know’)
Select correct Distribution Channel if it doesn’t appear on its
Enter valid Booking.com Hotel code.
Please note that you will have to enter the Hotel-code while making linking of the 1st accommodation of the selected Location. From the next time onwards the Hotel-code will appear on its own when you would select the Location.Now select desired accommodation(s) and enter there valid Booking.com Room code and then click on ‘Next’ button.
Please note that ‘Next’ button will only appear when all the Asterisk * marked fields are filled in.
Step 2nd – ‘Select rate-type’, in this step you will have to linking Rate-type(s) for the selected accommodation(s). Select desired rate-type(s) from the list for individual accommodation and enter valid Booking.com Rate-code
Note- If multiple rate-types are available you can even link more than one at the same time.
Explanation for the ‘Booking.com Inherited rate’ Toggle is visible if user hover on the ‘i’ icon. (Refer below picture).Click on the ‘Next’ button once all the mandatory fields (Asterisk * marked) are filled in
Step 3rd - ‘Summary’, this step will give you complete overview of all the details you have entered in previous 2 steps. Please go through the same and click on ‘previous step’ incase you need to do some changes in the linking OR if everything is fine then click on ‘Finish’ button.
Following above steps you will link accommodation-type(s), and if all the configuration related to availability and rates are correct, uploads will be done when the next job-scheduler runs for price & availability.
Link new Accommodation Type(s) for Booking.com Content API
Step-by-step:
Open the Integration Manager module
Now in Booking.com go to the “Linked accommodation types” card and click on ‘Activate new accommodation types’
A new window will popup, select desired ‘Location’ from dropdown and then you will see all the available accommodation-types under that location that are available for linking. However, because you wish to link this Location through Content API, you will have to switch ON the toggle button for “Property content create/update”.
Once this option is selected, you will have to not enter Booking.com hotel code & Booking.com Room code, you just have to select the desired Acco-type from the list and click on ‘Next step’ button
Now in the next step 'Select rate-type’, you will have to linking Rate-type(s) for the selected accommodation(s). Select desired rate-type(s) for the individual accommodation and click on ‘Next step’ button. Even here you do not have to enter Booking.com Rate-code
In the ‘Summary’ step you will get complete overview of all the details you have entered in previous 2 steps. Please go through the same and click on ‘previous step’ incase you need to do some changes in the linking OR if everything is fine then click on ‘Finish’ button.
How to Activate OR Deactivate existing Acco-type Linking
Open the Integration Manager module and select the ‘Reseller’ for which you want to make changes
Go to ‘Linked accommodation types’ card and now filter out the accommodation linking which you wish to activate/deactivate
If there are multiple Rate-code linked than there will be separate linking per rate-code. As seen in the screenshot there are two linking’s for Booking.com room-code: 22421, one linking is of Rate-code: 34546 and another one is of rate-code: 171287. If you wish to ‘re-Activate’ linking of rate-code 34546, than simply click on the ‘Inactive’ button to again ‘Activate’ the same. (refer screenshot)
Similarly if you wish to ‘Deactivate’ the linking, for example if you wish to deactivate linking of rate-code: 171287, then simply click on ‘Active’ button and click on the ‘confirm’ button in the pop-up to ‘Inactive’ the linking for that rate-code. (Refer screenshot)
Link multiple rates to already existing Accommodation linking
Open the Integration Manager module and select the ‘Reseller’ for which you want to make changes
Go to ‘Linked accommodation types’ card and now filter out the accommodation linking for which you want to link multiple rate-codes and click on ‘Activate new rates’ button
This will now open a pop-up window in which you will first have to select the MXTS rate-type that you wish to link for this accommodation, now enter the ‘Rate-code’ of the Reseller. Then if applicable user can select other options by turning on the toggle button for them and finally click on “Confirm” button. User can also linking multiple Rate-type with multiple reseller-rate-code by clicking on (+) button (Refer screenshot)
Link multiple rates to already existing Accommodation linking (Booking.com Content API)
Open the Integration Manager module and select the ‘Reseller’ for which you want to make changes
Go to ‘Linked accommodation types’ card and now filter out the accommodation linking for which you want to link multiple rate-codes and click on ‘Activate new rates’ button
This will now open a pop-up window in which you will first have to select the MXTS rate-type that you wish to link for this accommodation. Now because the Acco-type linking have the toggle ON for option “Property content create/update“, you do not have to enter the ‘Rate-code’ of the Reseller. Then if applicable user can select other options by turning on their toggle button(s). User can also linking multiple Rate-type with multiple reseller-rate-code by clicking on (+) button (Refer screenshot). Once everything has been selected, kindly click on “Confirm” button to save the changes.
Stop Sale
Stop sale is a feature through which availability can be restricted for a specific distribution channel (DC). This feature is extensively used when a user wants to stop/restrict availability of a specific Acco-type at Resellers side.
Types of Stop-sale
Block 🚫
'Block' is the type of stop-sale through which you can completely restrict the availability of the Acco-type on reseller side.Lower ⬇
'Lower' is the type of stop-sale through which you can lower the availability of the Acco-type and send the remaining availability to reseller.
For example: Acco-type ‘1 Bedroom’ has in total 10 units under same and all are available for the future dates. Now if you want to only send 6 out of 10 as availability to reseller, then select the ‘Lower’ stop-sale and enter the value as 4. System will take the available units quantity of 10 and less it by 4 and send remaining quantity of 6 as availability to reseller. Now for a certain date if 23 units are already booked out of the 10 units of that Acco-type, then system will less 4 (stop sale value) from the available quantity of 7 units and send 3 as available quantity to resellerRestrict S
'Restrict' is the type of stop-sale where you can define the number of availability that you want to send to reseller. No matter how many units are available under an Acco-type for a date, system will only send the number of availability that is defined in 'Restrict stop sale.
For example: Acco-type ‘1 Bedroom’ has in total 10 units and if you define the ‘Restrict’ stop-sale as 3, then system will only send 3 as available quantity to the reseller. But if there are bookings on the units for specific date range and for those date range there are only 2 units available, then system will send availability as 0 to the reseller.
Stop-sale can be configured for a acco-type from 'Rates Manager' in two different ways:
Update Stop-sale from “Rates”
Open the ‘Rates Manger’ and click on ‘Rates', click on the setting icon ⚙ and make sure that the check box for the 'Resellers’ is ON.
Now close the setting drawer and select the desired Acco-type from the search bar and scroll down till you see “Resellers” option. Here all the resellers opted by you will be visible.
As already explained previously you can select from any of the three options (Block 🚫 , Lower ⬇ & Restrict S ) and add Stop-sale for that specific Acco-type for the specific date.
How to add stop-sale ⬇🚫Block 🚫 : So while adding stop-sale just select this ‘Block’ option for the specific date or date rang and the Acco-type should get blocked/locked for that date (only for the DC used for linking in the reseller)
Lower ⬇ : As seen in below screenshot, click on the specific date and then click on the down arrow ⬇ icon which is basically denotes 'Lowering stop-sale'. Now enter the desired number
Unit Level Linking for Reseller Airbnb
Step-by-step:
Open the Integration Manager module
Select ‘Reseller Connection’ under Configuration, here you would see all the existing resellers that you have opted for. Select the reseller you wish to make linking’s for. (Example- Select Airbnb)
Now in Airbnb go to the “Linked accommodation types” card and click on ‘Activate new accommodation types’
A new window will popup, select the desired ‘Location’ from the dropdown and select the Airbnb DC, then you will see all the available accommodation types under that location that are available for linking.
Please note that Only those Accommodation-types will appear in the result for whom the Airbnb DC has been added in the valid representation. (Refer to below picture & also read ‘Did you know’)
Enter valid Airbnb Hotel code.
Please note that you will have to enter the Hotel-code while making linking of the 1st accommodation of the selected Location. From the next time onwards the Hotel-code will appear on its own when you would select the Location.Now select the desired accommodation(s) and turn ON the toggle button for ‘Unit level linking’ and click on ‘Next’ button.
Please note that ‘Next’ button will only appear when all the Asterisk * marked fields are filled in.Step 2nd – ‘Select rate-type’, in this step you will have to linking Rate-type(s) for the selected accommodation(s). Select desired rate-type(s) from the list for individual accommodation
Note- Airbnb does not support multiple Rate-type linking
Step 3rd - ‘Select units’, in this step select the desired unit(s) under the accommodation type that you selected before. You can select multiple units at the same time. After selecting the unit(s) click on “Next step” button in the bottom right corner
Step 4th - ‘Summary’, this step will give you a complete overview of all the details you have entered in previous 3 steps. Please go through the same and click on ‘previous step’ in case you need to do some changes in the linking OR if everything is fine then click on the ‘Finish’ button.
Note: This is how the Unit level linking is made for the Airbnb reseller. Making these linkings does not ensure the units are Live as they will only go LIVE once the scheduled Jobs for data-type ‘Property content create/update, Availability & Price’ run successfully. Kindly make use of the ‘Reseller Dashboard’ for monitoring if the uploads have been successful or failed for the linked Unit(s). If failed, then check the failure response on the reseller dashboard itself and make the necessary configuration change. Later again check the fresh uploads once the Job runs.
Unit Level Linking for Reseller HomeAway
Step-by-step:
Open the Integration Manager module
Select ‘Reseller Connection’ under Configuration, here you will see all the existing resellers that you have opted for. Select the reseller ‘Homeaway’ from the list.
Now in HomeAway go to the “Linked accommodation types” card and click on ‘Activate new accommodation types’
A new window will popup, select the desired ‘Location’ from the dropdown and select the Homeaway DC, then you will see all the available accommodation types under that location that are available for linking.
Please note that only those Accommodation-types will appear in the result for whom the Homeaway DC has been added in the valid representation. (Refer to the below picture & also read ‘Did you know’)
Enter valid Homeaway Hotel code.
Please note that you will have to enter the Hotel-code while making linking of the 1st accommodation of the selected Location. From the next time onwards the Hotel-code will appear on its own when you would select the Location.Now select the desired accommodation(s) and turn ON the toggle button for ‘Unit level linking’ and click on ‘Next’ button.
Please note that ‘Next’ button will only appear when all the Asterisk * marked fields are filled in.Step 2nd – ‘Select rate-type’, in this step you will have to linking Rate-type(s) for the selected accommodation(s). Select desired rate-type(s) from the list for individual accommodation
Note- Homeaway does not support multiple Rate-type linking
Step 3rd - ‘Select units’, in this step select the desired unit(s) under the accommodation type that you selected before. You can select multiple units at the same time. After selecting the unit(s) click on “Next step” button in the bottom right corner
Step 4th - ‘Summary’, this step will give you a complete overview of all the details you have entered in previous 3 steps. Please go through the same and click on ‘previous step’ in case you need to do some changes in the linking OR if everything is fine, then click on the ‘Finish’ button to save the changes.
Note: This is how the Unit level linking is made for the Homeaway reseller. Making these linkings does not ensure the units are Live as they will only go LIVE once the scheduled Jobs for data-type ‘Availability, Rates and Restrictions’ run successfully. Kindly make use of the ‘Reseller Dashboard’ for monitoring if the uploads have been successful or failed for the linked Unit(s). If failed, then check the failure response on the reseller dashboard itself and make the necessary configuration change. Later again check the fresh uploads once the Job runs.
How to configure 'Additional features
Step-by-step:
Open the Integration Manager module
Select ‘Reseller Connection’ under Configuration, here you will see all the existing resellers that you have opted for. Select the reseller you wish to make linking’s for. (Example- Select Airbnb)
Now in Airbnb go to the “Additional Features” card and click on ‘Add Feature’
A new window will pop up,
| Table of Contents | ||
|---|---|---|
|