Register meter readings- Operations application
- Niels van der Vliet
Owned by Niels van der Vliet
Through the Maxxton Operations application, there is a possibility to register meter readings for the meters we know in the system. How to do this?
How to register meter readings through the Operations application:
- Once at the meter reading dashboard, there is a possibility to search for a specific unit.
- Select the unit for which a meter reading should be registered.
- Select which meter you want to register a reading for by using the tab buttons on top (gas, water, electricy or cleansing.
- Hit the "add meter value" button and fill in the current value displayed on the meter.
- There is a possibility to indicate whether it's a start value (non-likely, this is used very occasionally).
- There is a possbility to add a description, which will be stored together with the meter reading.
- Hit the "submit" button and the value is stored within the system.
Explanation video:
Setting up the right configuration:
- User should have the permissions: Operations application - Meter readings
- The units that you want register meter readings for belong to a specific accommodation kind. There the meter reading toggle should be enabled below Settings.