02. Energy charging guest MXTS

Owned by Carin van de Velde
Last updated: Mar 02, 2022 by Susan Smits
2 min read
When the configuration has been completed and the meter reading values have been added, the charging could be completed


Step 1a: Add meter readings in Accommodations

In Accommodations on Unit level on the tab Energy Guest, the first and following meter readings could be added. If this is done, the reservation will automatically show the start value. 


=>  This part is not available in MXTS yet.

Step 1b: Add meter readings in reservation through Check-out 

The Start end End value could be added manually in the reservation through the Check-out module as well.

Once the end value has been added, the Startdate and Enddate are filled automatically, even as the Total usage and the costs of the corresponding extra per usage unit.


=>  Currently there is a bug that will be fixed through  MXTS-29683 - Issue updating the energy start value READY FOR QA , therefore the costs and start value are not shown in MXTS.

Step 2: Check the bill

Once the meter reading have been completed, the bill should show the correct costs per extra.

In CICO all booked resources are shown, just like on the bill in the reservation itself.